Get In Touch

Contact Us

Get in touch through the form below.



  • SBL820E machine


Reference: 111


Automatic Die-Cutting Platen, with Stripping

Maximum Sheet Size 815mm x 605mm
Minimum Sheet Size 320mm x 280mm
Maximum Die-Cutting Paper Size 805mm x 590mm
Minimum Gripper Margin 9.5mm
Die-Cutting Output Force 200ton
Inner Size of Cutting Chase 926mm x 618mm
Lower Cutting Plate Size 848mm x 600mm
Material Handling Range

0.1mm - 2mm

80gsm - 1400gsm

Corrugated Board Range < 4mm
Recommended Cutting Rule Height 23.60mm
Maximum Cycle Speed 8,500cph
Maximum Operating Speed 8,000sph
Registration Tolerance +0.075mm
Total Power Requirement 15KvA
Machine Outer Dimensions

L - 4166mm / W - 1869mm / H - 1844mm

Approximate Weight 9ton
Feeder Pile Height (with pallet) 900mm
Feeder Pile Height (with non stop system) 1000mm
Feeder Pile height (with 300mm elevation option) 1300mm
Delivery Pile Height 740mm
Delivery Pile Height (with 300mm elevation option) 1040mm
Software Version V.02



  1. Full colour touch screen HMI. This self-diagnostic system is easy to operate and helpful for troubleshooting throughout each section of the platen.
  2. Double axis feeder head, combined with ‘slow down’ device to ensure steady and accurate delivery of stock to front lays.
  3. Able to run a wide range of stock, from thin paper to B-flute corrugated.
  4. Sheet transport to front lays monitored and controlled by photoelectric sensors.
  5. Standard equipment includes operator and drive side push/pull side lay, monitored by micro photoelectric sensors.
  6. High Strength alloy gripper bars.
  7. Single point gripper opening system for easy feed and transport through platen, stripping and delivery sections.
  8. Pneumatic locking device for cutting chase.
  9. Cutting pressure up to 200 tons.
  10. Non-stop feature in both Feeder and Delivery section.
  11. Double action stripping for maximum waste removal.
  12. Full CE safety accreditation.

Your Enquiry get in touch