Automatic Foil Stamping and Die-Cutting Platen
|Maximum Sheet Size||815mm x 605mm|
|Minimum Sheet Size||320mm x 280mm|
|Maximum Die-Cutting Paper Size||805mm x 590mm|
|Minimum Gripper Margin||9.5mm|
|Die-Cutting Output Force||200ton|
|Inner Size of Cutting Chase||926mm x 618mm|
|Lower Cutting Plate Size||848mm x 600mm|
|Material Handling Range||
0.1mm - 2mm
80gsm - 1400gsm
|Corrugated Board Range||< 4mm|
|Recommended Cutting Rule Height||23.60mm|
|Maximum Cycle Speed||8,500cph|
|Maximum Operating Speed - Die Cutting||8,000sph|
|Maximum Operating Speed - Foil Stamping||6,500sph|
|Total Power Requirement||30KvA|
|Machine Outer Dimensions||
L - 4174mm / W - 1869mm / H - 2366mm
|Feeder Pile Height (with pallet)||1200mm|
|Feeder Pile Height (with non stop system)||1300mm|
|Delivery Pile Height||1040mm|
|Standard Number of Longitudinal Foil Shafts||3|
|Maximum Foil Diameter (including core)||240mm|
|Maximum Foil Rewind Diameter||260mm|
|Maximum Foil Width||800mm|
|Number of Heating Zones||8|
Full colour touch screen HMI. This self-diagnostic system is easy to operate and helpful for troubleshooting throughout each section of the platen.
Computerized foil control system via full colour touch screen HMI.
Standard 3 shafts foil feeding system, which are individually programmable. Each shaft is on telescopic shafts for easy foil loading.
Unique, airshaft foil rewind device, to ensure the foil rewinds accurately which also allows easy waste foil removal.
8 heater zones, all individually programmable from HMI
Hologram foil registration system (OPTION).
Pneumatic honeycomb and cutting plate locking system to eliminate loose mechanical parts.
Automatic on/off impression system with tonnage searching pre-set program.
Maximum 200 tons of pressure for both foil stamping and die-cutting.
Sheet transport to front lays monitored and controlled by photoelectric sensors
Standard equipment includes operator and drive side push/pull side lay, with micro photoelectric sensors.
High Strength alloy gripper bars.
Single point gripper opening system for easy feed and transport through platen, stripping and delivery sections.
Non-stop feature in both Feeder and Delivery section.
Wide range of stock from thin paper to B-flute.
Full CE safety accreditation.